
Convert your 100 angle grinder into a drill
- Converting a 100mm angle grinder into an electric drill is often needed when a drill is unavailable or when a specific task calls for the reach and power of an angle grinder. This conversion chuck provides a practical solution by allowing a drill bit or hole opener to be fitted to a compatible 100 angle grinder. It removes the need for a separate drill in situations where only an angle grinder is on hand, provided the grinder is a 100 model. The adapter is intended specifically for this conversion and must be installed with the angle grinder gasket in place before fitting. When fitting a drill bit or hole opener, the key must be used to tighten the chuck securely. After installation, the grinder should be run idle for one minute to confirm the adapter and bit are correctly seated and the grinder operates normally. This simple check helps ensure the setup is ready before use. The conversion chuck is designed for 100 angle grinders and is not suitable for other grinder sizes. It is supplied as a single adapter unit. The product includes the necessary gasket for installation, which must be added before mounting the adapter. A key is required to tighten the chuck when a drill bit or hole opener is fitted, and this key should be used each time a bit is changed. The adapter is made for converting a 100 angle grinder to an electric drill function. No further dimensions, materials, or compatibility details are provided in the source information. For safe operation, always use the gasket, tighten with the key, and perform the one-minute idle check before starting work. This product is a practical accessory for those who need occasional drilling capability from a 100 angle grinder.
Secure fit with gasket and key tightening
Features
- Converts a 100 angle grinder into an electric drill for fitting drill bits and hole openers
- Suitable only for 100 angle grinder models
- Requires the angle grinder gasket to be added before installing the adapter
- Must be tightened with the key when installing a drill bit or hole opener
- Includes a one-minute idle run check after installation to confirm correct seating and normal operation
Store Comparison
|   |
|
OTHERS |
|---|---|---|
Product Selection |
||
Pricing |
||
Local Service |
||
After-Sales Support |
||
Security Guarantee |
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!
USE CODE “HOMEENJOY” FOR 10% OFF!


